Wątek: Router do 360
Wyświetl Pojedyńczy Post
Stary 20-09-2007, 08:35   #36
McDriv3r(PL) Zobaczymy co z niego wyrośnie
Zarejestrowany: Jul 2007
Posty: 12
Reputacja: 0
Domyślnie Router do 360

Mam router D-Linka 504t.Ma ktos moze szczegolowa instrukcje jak dobrze konfigurowac ten router pod 360?(ip gateway dnsy itp)

[size=9px][ Dodano: 20-09-2007, 08:33 ][/size]
Znalazlem cos takiego.Moze to dobre ale nie kumam bardzo z tego.

This subject should be either under DSL Hardware (D-Link) or DSL General, but anyway, here is what you have to do.

Info from: www.dlink.com.au/tech - DSL-504T

What ports to open for Xbox and Xbox 360
Xbox Live communication requires the following ports to be opened:

UDP 88
UDP 3074
TCP 3074

The below steps are for firmware 2.0 and above.

Step 1 Set up your Xbox with static IP address. For example:
IP Address:
Subnet Mask:
Default Gateway: (your router's LAN address)
Primary DNS: (or whichever your ISP is using)
Secondary DNS: (or whichever your ISP is using)

Step 2 Open your web browser and enter the IP address of the router ( Enter user name (admin) and your password (admin).

Step 3 Add LAN Client (Xbox) into the router before you can open any ports. Go to Advanced > LAN Clients. Type in the IP address of the Xbox (e.g. You can specify the name of this workstation under Host Name (e.g. Xbox). Click Add and then Apply.

Step 4 Go to Advanced > Virtual Server.

Step 5 Select the 'User' Category and click on Add button below.

Step 6 Enter the name for this entry under Rule Name (e.g. XboxLive). Then select the necessary protocol (TCP or UDP). Specify the necessary port number in all fields including the Port Map.
You will need to enter the following ports:
UDP 88
UDP 3074
TCP 3074

Click Apply when done.

Step 7. Go to Advanced > Virtual Server and under LAN IP select your LAN Client (which we added in Step 3). Select 'User' Category and you should see the rule which you have created in Step 6. Select it and then click on Add > to move it to Applied Rules section. Click Apply.

Step 8 To save the new settings into the router's memory go to Tools > (System) > Save & Reboot. Click on Save & Reboot button. The router will save the settings and restart
McDriv3r(PL) jest offline   Odpowiedź z Cytowaniem